// the take
A pair of Arduino sketches that drive a WS2812B LED strip in sync with music, using either a raw analog input for bass-only reactivity or a Sparkfun Spectrum Shield for 7-band frequency splitting. It's aimed at hobbyists who want a weekend LED project, not anyone building a real audio-reactive lighting product.
Offers two concrete build paths at different cost/complexity tiers: a $0-extra-hardware bass-only version using a single ADC pin, and a proper multi-band version once you add the spectrum shield. Leans on FastLED for the actual LED driving, so the one piece of this that needs to be fast and correct (WS2812B timing) is handled by a mature, widely-used library rather than hand-rolled. Bill of materials is tiny and cheap, so the barrier to trying it is low.
Dead project — last commit is from January 2021, no activity since, so any compatibility issue with newer Arduino cores, FastLED versions, or LED chipsets is yours to debug alone. The no-shield version is a single capacitively-coupled analog pin with no calibration or noise filtering, so behavior will vary wildly with music volume and source — it's a crude VU meter, not real bass detection. The better version depends on the Sparkfun Spectrum Shield (MSGEQ7-based), a product that's increasingly hard to find and not something you can swap for an equivalent part without rewriting the frequency-reading code. Everything is hardcoded in a single .ino (pin assignments, LED count, thresholds) with no config layer, so every change means editing and reflashing source rather than tuning parameters.
We read the README, the directory tree and a key source file in October 2026. Nobody pays to be listed. How we judge →